P3 floor boards

[kartik]

Hi,
Are the floor boards in p3 1948 cars wooden or metal ?
I am confused because in my P3 under restoration the floor is all metal,
I would be very grateful if someone could please please upload some pictures
Of the p3 floor .

Thanks
Kartik

[moshe]

all metal

[deckell]

kartik mine are all timber and i cannot see where they could have been all metal, but then again i iam just a late comer to this rover game. i might add mine is a 1949 p/3 hope this is off some help.regards Derrick.Smith.

[nicolan]

hi,

I have 2 P3 Sports Saloon (1948 RHD and 1949 LHD).
Under the front seats is a metal construction. All floor panels are plywood : 2 pieces in front and 2 pieces rear.

Nicolas Nicolay
Belgium

[kartik]

Could Export models have different floors?
someone kindly upload some pictures,

thanks
Kartik

[kartik]

Pictures please !!
I need help as I have no other example to view here in India.

thanks
Kartik

[nicolan]

due to a house move, I have to relocate some spare parts, which happened last days.
So, here some pictures of the floor boards of a P3 Sports Saloon (1949).
I also took a look at the parts list : there is no difference between floor for a Saloon or a Sports Saloon.
Thickness = 8 mm (0.8 cm).

there is a part in the front floors that can flip over : = acess to the jack-up points.





Nicolas Nicolay
Belgium

[kartik]

due to a house move, I have to relocate some spare parts, which happened last days.
So, here some pictures of the floor boards of a P3 Sports Saloon (1949).
I also took a look at the parts list : there is no difference between floor for a Saloon or a Sports Saloon.
Thickness = 8 mm (0.8 cm).


Nicolas Nicolay
Belgium

Thank you so much for the pictures and the effort . You have made my day , sir.
Regards
Kartik
India

[Chris C]

Do you still have the metal floor sections in the base of the body, where the front seats are mounted ?
As the floor consists of a front wooden section, metal seat base section and then the rear wooden section.
Would you like some measurements for the various floor sections ?
Rgds, Chris C

Rover 75 / P3 / 1949
Rover 14 / P2 / 1939

[kartik]

Do you still have the metal floor sections in the base of the body, where the front seats are mounted ?
As the floor consists of a front wooden section, metal seat base section and then the rear wooden section.
Would you like some measurements for the various floor sections ?
Rgds, Chris C

Rover 75 / P3 / 1949
Rover 14 / P2 / 1939

Hi Chris C
I still have the metal sections, but it would greatly help if you could give me some measurements,
appreciate it

regards
Kartik