P3 bonnet tape
Posted: Thu Feb 17, 2022 7:15 pm
Hi all, I am struggling to find the perfect size self tapping screw to secure the twin roll bonnet tape to my newly painted 4 light saloon. The nearest I have found are pan headed No 6 by 3/8. The diameter of these is ok as the existing holes in the bodywork are approx 3mm dia. However the pan head, even without a washer, is too close to the top of the tape and will possibly hit the bonnet as it closes. Rivets are too large in their shaft diameter although the heads are a perfect size.
Any help or advice gratefully received.
Don Cole.
Any help or advice gratefully received.
Don Cole.