Spare wheel fitting

Post Reply
Gavin
Posts: 1
Joined: Tue Aug 20, 2019 3:39 am

Spare wheel fitting

Post by Gavin » Tue Aug 20, 2019 10:49 pm

Good morning. I am a new member to this forum. I have just finished a restoration on a 1948 6 light P3 75 car no: 8410623 I am pleased with the outcome the car is BRG, dark with beige interior. The car sits on 525/550 x 17" 4 ply tyres. I have fitted a later twin SU carbed head and it does go well. I do have a problem. The spare wheel is a 17" with 525/550 4 ply tyre that does not fit in the spare wheel compartment. If I force it in deflated, it will be useless as I am unable to get it out by myself and it will be flat. Did the 75 have a smaller spare wheel? The car came with a spare when I bought her some 20 years ago , but I never checked the size back then, although it may well have been a beaded wheel, unsure of the whereabouts of this spare now. Anyone got any thoughts on this. Gavin Hill Nelson Rover Car Club NZ

User avatar
luli
Posts: 657
Joined: Sat Jun 04, 2011 6:49 am
Contact:

Re: Spare wheel fitting

Post by luli » Mon Oct 14, 2019 7:54 pm

Considering that you use the spare wheel only in emergency you can fit a smaller tire like 17X450 or 17X500/525. see here https://www.vintagetyres.com/shop/tyres ... 450-17-77l
Rover 10 1946 RHD
Rover 10 1947 LHD
Rover 12 1947 tourer LHD
http://lulisml.wordpress.com/

DavidRuddy
Posts: 5
Joined: Tue Aug 04, 2020 10:37 am

Re: Spare wheel fitting

Post by DavidRuddy » Thu Aug 06, 2020 3:38 pm

Hi I also have p3 I carry spare wheel deflated but have adapted spark plug to use engine for quick painless inflation

Post Reply