The vinyl on one of the front corners of my fixed sunroof section (left-hand side of exterior picture) has come away on the underside, so I need to remove the sliding sunroof to stick it back under. I have the workshop manual explaining the process, but having never done it before I wanted to check a few things. So, I am guessing I need to remove the sunroof handle (which is a temporary item fitted by my garage as the new one I had purchased did not fit).
1) I have no rexine panel to remove, so no visible locking bar, so is that an issue?
2) If the above is OK, then is it simply a matter of lifting the front edge of the sliding sunroof and pulling it forward and out?
3) How are the rear sliders sprung off the runners?
1937 Rover 12 Sports Saloon Sliding Sunroof Removal
1937 Rover 12 Sports Saloon Sliding Sunroof Removal
- Attachments
-
- IMG_20260406_102607730_HDR.jpg (92.26 KiB) Viewed 33 times
-
- IMG_20260406_102540680_HDR.jpg (60.04 KiB) Viewed 33 times
-
- IMG_20260406_102532666.jpg (53.27 KiB) Viewed 33 times
1937 Rover 12 Sports Saloon