1936 - Opening front windscreen - aluminium base

Post Reply
Frost015
Posts: 21
Joined: Wed Oct 10, 2018 3:48 pm
Location: Stamford (Lincs)

1936 - Opening front windscreen - aluminium base

Post by Frost015 » Sun Nov 08, 2020 9:55 am

Time to get the windscreen back in .. however a couple of questions on the aluminium section that screws first onto the car ..

https://www.rover-forum.thersr.co.uk/do ... iew&id=206

1. I plan to bed this down into soft bitumen sealing compound .. good idea or not ?
2. It came out as bare aluminium ... although this could have been stripped by previous owner. Before installing I plan to etch coat and then spray in a neutral silver colour. Is this correct ?. Or should I leave unpainted, or go body colour ?

https://www.rover-forum.thersr.co.uk/do ... iew&id=205

Thanks for any responses ..

Ian
Attachments
9360BBBA-4893-41C0-B3E0-A0FECF5C5F60.jpeg
9360BBBA-4893-41C0-B3E0-A0FECF5C5F60.jpeg (117.68 KiB) Viewed 2540 times
F75115C4-4E3E-45F7-98CF-F530A1F89A29.jpeg
F75115C4-4E3E-45F7-98CF-F530A1F89A29.jpeg (162.98 KiB) Viewed 2540 times
1936 Rover 12 Saloon

Post Reply