Rover Sports Register Forum

I am trying to level up the rear suspension after new springs fitted and the car has a 1” list. I have read the w/s manual item on doing this by slackening off the shackle bolts and winding in or out the threaded adjustment bolt. This makes no measurable difference to the height measured from a leve...

Many thanks that’s a great help. Namric can supply these with, (as you point out), the modern equivalent with a nylon insert. No doubt the originals will surface at some point but I need to move on with the reassembly so faced with buying new.

Thanks again and my own thoughts confirmed re BSF.

Having lost during the nuts to the shackle bolts during strip down I need to identify the thread before sourcing a new set. The parts manual refers to the bolts as 9/16 inch but does not state what the thread type is. Can anyone help with this info please ?

Hi all, I am struggling to find the perfect size self tapping screw to secure the twin roll bonnet tape to my newly painted 4 light saloon. The nearest I have found are pan headed No 6 by 3/8. The diameter of these is ok as the existing holes in the bodywork are approx 3mm dia. However the pan head,...

I have just re-joined the RSR after a lapse of many years and would appreciate advice from anyone who has experience of removal of the original radio from their P3 75. There appear to be many screws, nuts and bolts, all, or some of which could be relevant to the exercise but it would be helpful if a...