Rover Sports Register Forum

Thanks all for the advice , much appreciated, looking at all the options I think I will go with the dynametor as this seems the most sensible solution based on cost and eliminating other potential reliability issues with the current set up, I may have to make some modifications to make one fit thoug...

Hi Getting near the end of my winter project on my P2 10 1939 I have one last problem to solve which I hope some members can help me with, namely the RF91 voltage regulator on my car, this had been playing up just before I put here away for the winter The unit was showing over charging on the ammete...

Hi After replacing my 10 engine after painting the bulk head , inner wings and bonnets, I got ready to get her started again - check fuel delivery , check ignition timing bring oil pressure up without distributer cap on, all system s go, now start her up, and keep trying to start her up, turning ove...

Chris thanks for replying, I seem to remember an article somewhere, maybe, on this forum, about fitting 18'' wheels to a 17'' wheeled car, however this would mean changing all the tyres sizes also, a tad expensive I would think, thanks for the offer however I will keep searching for the correct size...

Just made a rookie mistake, took all my door handles including the locking ones on the drivers side and the boot locking one, and yes you guest it, the lock barrels are now effectively welded into the handles ! I seem to remember the chromers telling me that all I would need to do was wriggle the ke...

Hi Rob

Would be interested in what you have fitted, as gaiters as I am about to do the same, can you post a picture ?

Thanks

Mike

Hi Chris

Thanks for the reply, I would be interested in them, although would these not be the 18'' wheels rather than the 17'' wheels I have on mine ?
Can they be made to fit ?

Thanks

Mike

Hi

Anybody out there got a set of wire wheels for a P2 1939 ??

Also If I can find a odd one here and there, what am I looking for as regards hub size, fixings etc.

Any help would be appreciated

Mike

Found a pair, now sorted
I have a pair of 8'' Horseshoe type lenses on E Bay now, the flat type , as I have replaced them with a dished pair

Mike

Bingo !! That's exactly what is was, I took off the inspection plate and found the one of the selectors was out of the neutral position, one mirror, one screw driver and a torch and a lot of fiddling as things appeared backwards and I managed to line them up again, I am glad I asked for advice first...