Rover P3 1948 Indicator Switch /Lever

[kartik]

Hi,

I need the Rover P3 1948 Indicator Switch /Lever.
If anyone can help please message me, I have spoken to Mike Couldry and He doesnt have one.

Thanks
Kartik

[47p2]

I think I have one for a P2 but not sure if it's the same as the P3

[chris dancey]

I too have a P1 and a P2 type, they are very fragile being made of aluminium, the internal switching can also be a bit ' delicate ', some parts are interchangeable. Do you have a photo ?

[kartik]

Thanks for your replies.
I am unable to directly post pictures , so have uploaded a couple of pictures from the internet on flickr,.
here is the link.
http://www.flickr.com/photos/71094815@N05/

I think the switch would be same for P1 P2 P3,

If you think it could fit please Pm me,
Thanks a Lot

Kartik

[jefflee]

Ive not had a P3 but have seen the indicator switch on some have a light switch on the opposite end unlike the 3 different types on P2s.

[47p2]

I will look out the P2 switch over the next few days and take some pictures.

I think it's from a 1939 car

[kartik]

Just a reminder , if any one has found one,

cheers
Kartik

[47p2]

Been very busy, will go and have a look now

[47p2]

This is the one I have, the cable has been cut but I would have recommended changing it as the insulation will most likely be cracked.

[kartik]

This is the one I have, the cable has been cut but I would have recommended changing it as the insulation will most likely be cracked.

Thanks a lot , please let me know if i can have it ,
Please pm me .

Kartik