P3 Gearbox Mount
P3 Gearbox Mount
Does anyone know where I can purchase a gearbox mount for my P3 or is it more usual to replace the rubber.
Re: P3 Gearbox Mount
Ray,
Assume the P3 has a rubber block similar to P1/2 and these are available from Meteor Spares. Over time the block bonds itself to the aluminium mounting but the replacement rubber just pushes into place.
Tony.
Assume the P3 has a rubber block similar to P1/2 and these are available from Meteor Spares. Over time the block bonds itself to the aluminium mounting but the replacement rubber just pushes into place.
Tony.
Tony Gilbert
P1 12 Tourer
P2 12 6 Light Saloon
Discovery 3
Discovery Sport
P1 12 Tourer
P2 12 6 Light Saloon
Discovery 3
Discovery Sport
Re: P3 Gearbox Mount
Coincidence! I drained & refilled my gearbox today (P2 Tourer 1947) and noticed that I am missing a rubber pad (212423) on one side - the other side looks pretty crusty too! The bolt was screwed right down on to the top of the gearbox case! so 2 new pads please!
The oil was pretty horrible & has been replaced with Morris "Golden Film" AG classic - no additive- (£18.96 for 4 litres incl delivery!) Among the bits that came out was a tiny "roller"...more of a pin. About 1mm dia x 8mm long. I cannot see a roller bearing in my parts list that it might have come from...certainly not a freewheel roller!
The oil was pretty horrible & has been replaced with Morris "Golden Film" AG classic - no additive- (£18.96 for 4 litres incl delivery!) Among the bits that came out was a tiny "roller"...more of a pin. About 1mm dia x 8mm long. I cannot see a roller bearing in my parts list that it might have come from...certainly not a freewheel roller!