Wiring loom for1949 p3 75

Post Reply
deckell
Posts: 86
Joined: Mon Mar 05, 2012 11:12 am
Location: Bundaberg Queensland Australia

Wiring loom for1949 p3 75

Post by deckell » Mon Jun 25, 2012 12:58 pm

i am after the above for my rover and have come across a company named auto sparks in the uk. has any person had dealings with them.

lakesrally

Re: Wiring loom for1949 p3 75

Post by lakesrally » Mon Jun 25, 2012 1:36 pm

I bought my P3 '75' loom from them, it was fine. I found them very helpful; they put in extra wires for flashing indicators etc.

deckell
Posts: 86
Joined: Mon Mar 05, 2012 11:12 am
Location: Bundaberg Queensland Australia

Re: Wiring loom for1949 p3 75

Post by deckell » Tue Jun 26, 2012 7:30 am

Thank you stewart for that information much appreciated.regards Derrick from down under.

marnol74
Posts: 23
Joined: Thu Jul 16, 2009 8:32 pm

Re: Wiring loom for1949 p3 75

Post by marnol74 » Tue Jun 26, 2012 11:48 pm

Hello Derrick,

I too have had a replacement harness from autosparks and was very satisfied both with the quality and service provided. The individual wires and harness have been produced using the original fabric braiding method and looks great too.

Matthew

deckell
Posts: 86
Joined: Mon Mar 05, 2012 11:12 am
Location: Bundaberg Queensland Australia

Re: Wiring loom for1949 p3 75

Post by deckell » Wed Jun 27, 2012 12:08 pm

Thanks matthew these are all comforting remarks when one is looking to purchase items from so far away. regards Derrick

chris dancey
Posts: 386
Joined: Tue Oct 20, 2009 8:20 pm
Location: Brighton & Paphos, Cyprus

Re: Wiring loom for1949 p3 75

Post by chris dancey » Sat Jun 30, 2012 2:00 pm

ditto above. Autosparks also wired in an extra circuit as I have two solenoid operated headlamp tipping reflectors. Chris
1934 ( 1935 model ) P1 '10' Saloon RD 6160
1935 P1 '10' Saloon ( originally JB 6729 ) now VSJ 156
1946 P2 '14' Sports Saloon KPG 855
1933 MG J2 Cycle Wing Model APB 560
1933 MG J2 Competition Model ALX 124

deckell
Posts: 86
Joined: Mon Mar 05, 2012 11:12 am
Location: Bundaberg Queensland Australia

Re: Wiring loom for1949 p3 75

Post by deckell » Sun Jul 01, 2012 12:34 pm

Thanks chris this looks like the place i will be heading too.regards Derrick.

Post Reply