Search found 5 matches

by Hud60
Fri May 31, 2024 11:00 am
Forum: Early post WWII, P3 the original Rover 75 and 60
Topic: P3 75 floor panel fixing
Replies: 5
Views: 4031

Re: P3 75 floor panel fixing

For what it is worth...My P2 floor screws are all csk1/4 26 BSF x1" or 1.1/4" cone pointed. The many missing dished floor board washers I have made up from " Tile/Roof-nail washers" ! They have a 5mm hole, easily opened up to take the 1/4" screw. Available by weight on e-bay. 225grammes was enough,...
by Hud60
Fri May 31, 2024 10:58 am
Forum: Early post WWII, P3 the original Rover 75 and 60
Topic: P3 75 floor panel fixing
Replies: 5
Views: 4031

Re: P3 75 floor panel fixing

Thank you all for the responses. I have figured 1/4 BSF in the end. As suggested, running a tap through cleared the threads and then cleaned up bolts ran through nicely. Much appreciated!
by Hud60
Sat Apr 20, 2024 10:34 am
Forum: Early post WWII, P3 the original Rover 75 and 60
Topic: P3 75 floor panel fixing
Replies: 5
Views: 4031

P3 75 floor panel fixing

I have taken the floor panels out of my P3 75 to restore. I have removed all the fixing bolts which fix into the captive nuts on the outer frame and chassis. I'd like to replace them. What thread are they? I thought they were 1/4BSF but they seem to be slightly finer thread. Many thanks for any help.
by Hud60
Sun May 15, 2022 2:07 pm
Forum: New members
Topic: New Member
Replies: 1
Views: 18270

New Member

I've been in the RSR for some years - with a 1961 P4 100 - sold some years ago. My 1949 Series 1 Land Rover. Now, my P3 75 recently acquired - with some work being done on it at present - after it died on a rally in Portsmouth! Nice to be here.
by Hud60
Sun May 15, 2022 2:02 pm
Forum: Early post WWII, P3 the original Rover 75 and 60
Topic: Air Duct Fixings
Replies: 1
Views: 11928

Air Duct Fixings

Having taken the radiator out of my P3 75, I am now reassembling. I have the parts for mounting the air duct, but I am not sure how they fix back on. Would someone on the forum with a similar car be able to photo them in situ? I'd be most grateful. The parts book shows one fixing, but I cannot see t...